BEIJING SANXIN DINGFENG CO., LTD.
Home
FAX:010-80227331
CONSULTING SERVICE HOTLINE:400-7787-801
PHONE:010-80227330
Address: Room 7102, 7th Floor, Building 8, No. 9, Guangping Street, Daxing District, Beijing
EVERY DROP OF OIL IS A RESPONSIBILITY
Copyright: Beijing Sanxin Dingfeng Technology Co., Ltd. 京ICP备15031493号 Powered by www.300.cn Beijing
Fexuel FX-AB100 20L,200L
product description:
The Boiling Snow AB100 series is blended with selected branched synthetic alkyl benzenes as base oils and additives. The ultra-low flocculation point makes it have good compatibility with (HFC) such as R22 refrigerant in low temperature/low temperature environment. When the liquid enters the low temperature zone, it will not produce latex high polymer. Superior stability and defoaming properties allow for optimum lubrication in the toughest conditions and at low temperatures. It is also completely compatible with mineral oils and can therefore also be added to mineral oil systems.
Boiling Snow AB100 Synthetic Refrigeration Oil is far superior to mineral refrigeration oil in the following respects:
Better return of lubricating oil, excellent thermal stability, low foaming, better oxidation resistance, lower flocculation point, and superior compatibility with refrigerants.
Performance and features:
● The low temperature performance of the product is much better than mineral oil and domestic alkyl benzene;
● Highly refined and free of wax;
● Lubricating oil returns better;
● Excellent thermal stability and heat transfer rate.
● Boiling Snow AB100 synthetic alkyl benzene refrigeration oil and R22 refrigerant excellent mutual solubility, is widely used in R22 is a low temperature screw refrigeration compressor, especially suitable for Bitzer, Hanzhong, Fusheng, Lai Fukang, Duling and other screw machines and cryogenic refrigeration equipment units.
Technical indicators:
Project |
Indicator |
experiment method |
Kinematic viscosity (40 ° C), mm 2 / s |
92 |
ASTM D445 |
Density 15 ° C g / cm3 |
0.916 |
ASTM D1298 |
Flash point (opening), °C |
255 |
ASTM D92 |
Pour point, °C |
-38° |
ASTM D97 |
Acid value mgKOH/g |
0.02 |
ASTM D974 |
Moisture, PPM |
35 |
ASTM D4928 |
Foam characteristics step (24 ° C), ml / ml |
0/0 |
ASTM D892 |
Compatibility (10% oil with R22, UCST) |
-58° |
Sealed tube experiment |
Infrared spectrum (ingredient) |
Synthetic alkylbenzene |
360FT-IR |
Application range:
Widely used in HCFC (R22) refrigerant large / medium / small screw refrigeration compressor.
Precautions:
● In the course of use, the oil should be replaced in time according to the oil change index to avoid damage to the equipment.
● Before replacing new oil, drain the old oil as much as possible and carefully system oil and impurities.
● This product is not flammable or explosive.
Packing specification:
20L, 200L